XHHW-2 Aluminum Power Cable 600 V / 1000 V
UL Type XHHW-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. The conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C. The conductor is rated 600 V / 1000 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended.
- Applications
- Construction
- Conductor Identification
- Voltage Rating
- Temperature Ratings
- Min. Bending Radius
- Standards
- Listings and Certifications
- Packaging
These cables are manufactured and tested to meet or exceed the following standards:
- ASTM B800 — 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
- ASTM B801 — Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
- UL 44 — Thermoset-Insulated Wires and Cables
- ICEA S-95-658 / NEMA WC70 — Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- Federal Specification AA-59544
- Federal Specification JC-30B
- Conductor: compact stranded AA-8000 series Aluminum Conductor Material (ACM).
- Insulation: Low coefficient of friction, abrasion, moisture, and heat resistant colored crosslinked polyethylene (XLPE).
Colored XLPE
600 V
- 90°C Dry or Wet.
- Marked VW-1 Sizes 6 AWG and larger marked FT2 Sizes 6 AWG and larger in all colors sunlight resistant and marked Sizes 1/0 AWG and larger marked “”FOR CT USE”” RoHS Compliant.
- Overall Diameter Less than or Equal to 1.000 in Not Under Tension: 4x outer diameter
Under Tension (During Pull): 6x outer diameter - Overall Diameter Greater than 1.000 in Not Under Tension: 5x outer diameter
Under Tension (During Pull): 7.5x outer diameter
UL listed as Type XHHW-2 – File E487972
- 250 ft reel
- 500 ft reel
- 1000 ft reel
- Master reel
- Coil
Related products
-
THHN/THWN-2 Aluminum Power Cable 600 V
UL Type THHN / THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. When used as UL Type THHN, the conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as UL Type THWN-2, the conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C or 75°C when exposed to oil or coolant. The conductor is rated 600 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended. -
Mobile Home Feeder – Aluminum Conductor
Mobile Home Feeder Cable is mainly used for supplying the energy required within the mobile home. The cable is designed for use at 600 volts or less and conductor temperatures not exceeding 90ºC. -
Type SE XHHW Aluminum Cable (SEU)
Quarles Wire UL Type SE, Style U cables are used as an above ground service entrance cable, panel feeder and in branch circuits in accordance with NEC Article 338. The conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C. The cable is rated 600 V. -
Type MC Three or Four Conductor wGround Aluminum Armor XHHW-2 600V
UL Type MC cables with XHHW-2 conductors are primarily used for services, feeders and branch circuits in commercial and residential applications in accordance with the NEC. Suitable applications include for indoor power and lighting circuits, exposed or concealed, cable tray, raceway (conduit) and embedded in plaster or in contact with masonry. The cable is suitable for dry locations only at temperatures not to exceed 90°C. The cable is rated 600 V.