Type MC Three or Four Conductor wGround Aluminum Armor XHHW-2 600V
UL Type MC cables with XHHW-2 conductors are primarily used for services, feeders and branch circuits in commercial and residential applications in accordance with the NEC. Suitable applications include for indoor power and lighting circuits, exposed or concealed, cable tray, raceway (conduit) and embedded in plaster or in contact with masonry. The cable is suitable for dry locations only at temperatures not to exceed 90°C. The cable is rated 600 V.
- Applications
- Construction
- Conductor Identification
- Voltage Rating
- Temperature Ratings
- Min. Bending Radius
- Standards
- Listings and Certifications
- Packaging
These cables are manufactured and tested to meet or exceed the following standards:
- ASTM B800 — 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
- ASTM B801 — Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
- UL 44 — Thermoset-Insulated Wires and Cables
- UL 1479 — Fire Tests of Through-Penetration Firestops
- UL 1569 — Metal-Clad Cables.
- ICEA S-95-658 / NEMA WC70 — Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- Federal Specification J-C-30B
- Conductor: Annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM).
- Insulation: Abrasion, moisture, and heat resistant black crosslinked polyethylene (XLPE) with colored stripe.
- Assembly: Cabled assembly with an equipment grounding conductor and a binder tape overall.
- Armor: Aluminum Interlocked Armor (AIA).
- Three Conductors:Black, Black with Red Stripe, Black with White Stripe.
- Four Conductors: Black, Black with Red Stripe, Black with Blue Stripe, Black with White Stripe
600 V
90°C Dry
- Not Under Tension: 7x outer diameter.
- Under Tension (During Pull): 10.5x outer diameter
- UL listed as Type MC — File E487848
- UL Classified 1, 2, and 3 Hour Through-Penetration Firestop Systems
Related products
-
THHN/THWN-2 Aluminum Power Cable 600 V
UL Type THHN / THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. When used as UL Type THHN, the conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as UL Type THWN-2, the conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C or 75°C when exposed to oil or coolant. The conductor is rated 600 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended. -
Type SE XHHW Aluminum Cable (SEU)
Quarles Wire UL Type SE, Style U cables are used as an above ground service entrance cable, panel feeder and in branch circuits in accordance with NEC Article 338. The conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C. The cable is rated 600 V. -
Type SE XHHW Aluminum Cable (SER)
UL Type SE, Style R Aluminum Cable features UL Type XHHW aluminum conductors, rated 90°C for dry or wet locations and 600 V. It is suitable for above-ground service entrance cable, panel feeder, and branch circuit applications per NEC Article 338. Available in two, three, and four conductor configurations. The conductor is made of annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM) with abrasion-, moisture-, and heat-resistant XLPE insulation. The cable includes a bare conductor, flame-retardant fiberglass-reinforced binder tape, and a sunlight-resistant, RoHS-compliant, flame-retardant gray PVC outer jacket. -
Type MC Three or Four Conductor w/Ground Aluminum Armor THHN/THWN-2 600V
UL Type MC cables with THHN / THWN-2 conductors are primarily used for services, feeders and branch circuits in commercial and residential applications in accordance with the NEC. Suitable applications include for indoor power and lighting circuits, exposed or concealed, cable tray, raceway (conduit) and embedded in plaster or in contact with masonry. The cable is suitable for dry locations only at temperatures not to exceed 90°C. The cable is rated 600 V.