Mobile Home Feeder – Aluminum Conductor
Mobile Home Feeder Cable is mainly used for supplying the energy required within the mobile home. The cable is designed for use at 600 volts or less and conductor temperatures not exceeding 90ºC.
- Applications
- Construction
- Conductor Identification
- Voltage Rating
- Temperature Ratings
- Min. Bending Radius
- Standards
- Listings and Certifications
- Packaging
These cables are manufactured and tested to meet or exceed the following standards:
- ASTM B800 — 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
- ASTM B801 — Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
- UL 44 — Thermoset-Insulated Wires and Cables (RHH / RHW-2)
- UL 854 — Service-Entrance Cables (USE-2)
- ICEA S-95-658 / NEMA WC70 — Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- Federal Specification AA-59544
- Federal Specification JC-30B
- Conductor: Annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM).
- Insulation: Abrasion, moisture, heat, and sunlight resistant colored crosslinked polyethylene (XLPE).
- Covering: Cabled assembly of two phase conductors (black with one marked phase A and one marked phase B),one neutral conductor (black with three extruded white stripes), and one ground conductor (green).
Colored XLPE and printed phase identification
600 V
- 90°C Dry or Wet.
- Sunlight resistant and marked RoHS Compliant
Overall Diameter Less than or Equal to 1.000 in
- Not Under Tension: 4x outer diameter
- Under Tension (During Pull): 6x outer diameter
Overall Diameter Greater than 1.000 in
- Not Under Tension: 5x outer diameter
- Under Tension (During Pull): 7.5x out diameter
UL listed as Type USE-2 — File E487841 UL listed as Type RHH / RHW-2 — File E487972
Related products
-
THHN/THWN-2 Aluminum Power Cable 600 V
UL Type THHN / THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. When used as UL Type THHN, the conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as UL Type THWN-2, the conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C or 75°C when exposed to oil or coolant. The conductor is rated 600 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended. -
Type MC Three or Four Conductor w/Ground Aluminum Armor THHN/THWN-2 600V
UL Type MC cables with THHN / THWN-2 conductors are primarily used for services, feeders and branch circuits in commercial and residential applications in accordance with the NEC. Suitable applications include for indoor power and lighting circuits, exposed or concealed, cable tray, raceway (conduit) and embedded in plaster or in contact with masonry. The cable is suitable for dry locations only at temperatures not to exceed 90°C. The cable is rated 600 V. -
Type SE XHHW Aluminum Cable (SER)
UL Type SE, Style R Aluminum Cable features UL Type XHHW aluminum conductors, rated 90°C for dry or wet locations and 600 V. It is suitable for above-ground service entrance cable, panel feeder, and branch circuit applications per NEC Article 338. Available in two, three, and four conductor configurations. The conductor is made of annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM) with abrasion-, moisture-, and heat-resistant XLPE insulation. The cable includes a bare conductor, flame-retardant fiberglass-reinforced binder tape, and a sunlight-resistant, RoHS-compliant, flame-retardant gray PVC outer jacket. -
Type MC Three or Four Conductor wGround Aluminum Armor XHHW-2 600V
UL Type MC cables with XHHW-2 conductors are primarily used for services, feeders and branch circuits in commercial and residential applications in accordance with the NEC. Suitable applications include for indoor power and lighting circuits, exposed or concealed, cable tray, raceway (conduit) and embedded in plaster or in contact with masonry. The cable is suitable for dry locations only at temperatures not to exceed 90°C. The cable is rated 600 V.